Posted on: 10 June 2017
When it comes to moving heavy objects, a forklift can be a vital tool for your employees. Sadly, individuals that have limited experience with owning forklifts will make errors when it comes to the batteries that could greatly compromise their performance.
Be Mindful Of Where The Forklift Batteries Are Being Stored
One of the most important factors in getting the most out of your batteries will be to ensure that they are being stored in a suitable location. Failing to keep your spare batteries in cool and dry locations can greatly decrease their ability to adequately hold a charge. As a result, you may find that you are needing to charge the forklifts far more frequently than is necessary. If you need to store a large number of these batteries, you may be best served by investing in a climate controlled storage unit so that you have a large enough area to safely and effectively store your batteries.
Ensure All Employees Are Trained On The Correct Steps For Charging The Forklift Battery
Any employees that will use the forklifts will need to be trained in the steps for properly charging the batteries. When individuals make the mistake of improperly charging these devices, they can permanently damage the battery, which will compromise the performance of the forklift until it is replaced. While it is common for individuals to assume that every forklift will have the same charging steps, this is not always the case as different models can have varying needs. For this reason, you should ensure that all of your forklift operators are properly trained in the steps for charging these vehicles so that potential battery problems can be avoided.
Check The Water In The Batteries On A Regular Basis
In order to function, your forklift batteries will require water. Without sufficient water, these devices will be unable to generate enough electricity to power the forklift. However, forklift operators will often fail to check the water level on a regular schedule, which can allow the water to drop low enough to pose serious problems for the battery. Ideally, the water levels should be checked before the battery is charged each time. To check the water, you will need to remove the protective lid that is on the device. Prior to attempting this step, you should read the owner's manual for your battery so that you are aware of any safety steps that must be followed before the battery can be safely serviced.
Whether you're investing in brand new or used forklift batteries, proper care is essential.Share